Transporting Brine at High Pressure
Installation of Pexgol Pipe to Transport Brine at High Pressure in a Borehole.
Estudo de Caso Nº
100
Cliente
|
Condições de Trabalho
Solução Pexgol
Aplicação
Comprimento
Categorias
The Challenge
Mekorot, the national water company of Israel and the country’s top agency for water management, required a corrosion resistant pipe that could hold very high pressure in a deep borehole (300 m). Furthermore, the pipe needed to be able to resist Chloride concentration of 10,100 mg/l.a
Pexgol Solution
A custom-made Pexgol pipe was installed (pipe 250 mm, class 43). The Pexgol pipe was provided in two coils of 150 m each. The two coils were connected by a special coupler that can hold the weight and the high pressure.
The other option that Mekorot considered was a pipe made of super duplex. Since installation of super duplex would take around 3 weeks and cost (approximately) 3,000,000 NIS ($9.3K) while installation of a Pexgol pipe is 3 days and cost about half. Pexgol pipe was the obvious choice.
Mineral Processing – Potash Processing Plant
|
Water Lines – High Pressure Water Feed Lines
|
Mine Dewatering – High Pressure Conditions
|
Success in Agricultural Desalination: Water Supply Challenges
|